Olivetti d-Copia 6500MF Plus Service Manual page 392

Code Contents
0660 Hard disk encryption key
error
0670 Hard disk overwriting era-
sure error
0800 Image processing error
JAM010X is detected twice.
0830 FAX control PWB flash pro-
gram area checksum error
A checksum error occurred
with the program of the FAX
control PWB.
Service Manual
Related parts
EEPROM
HDD
Main PWB Replace the main PWB (see page 1-5-74).
HDD
Main PWB Replace the main PWB (see page 1-5-74).
Replace the main PWB (see page 1-5-74).
Main PWB
FAX software
FAX control PWB
1-4-64
Check procedures/
corrective measures
1. Execute U004 if this occurs after the
EEPROM has been changed.
1. If an abnormal noise is heard from the
HDD, replace the HDD.
2. Check the SATA wiring between the
HDD and the main circuit PWB for loose
connection, disconnection and
damages, and that it is connected into
the correct terminal.
Main PWB: YC1,YC27
3. Replace the SATA cable.
4. Execute U024 to initialize (FULL) the
HDD (see page 1-3-29).
5. If an error is detected after executing
U024, replace the HDD.
1. If an abnormal noise is heard from the
HDD, replace the HDD.
2. Check the SATA wiring between the
HDD and the main circuit PWB for loose
connection, disconnection and
damages, and that it is connected into
the correct terminal.
Main PWB: YC1,YC27
3. Replace the SATA cable.
4. Execute U024 to initialize (FULL) the
HDD (see page 1-3-29).
5. If an error is detected after executing
U024, replace the HDD.
1. Reinstall the fax software.
1. Execute initializing by U600.(Refer to
the FAX service manual)
2. Replace the FAX control PWB.
2N8/2N7
Y116520-