16. Remove the main PWB by releasing the
projection of ground plate in the net-
work connector.
17. Check or replace the main PWB and
refit all the removed parts.
*: When replacing the main PWB, remove
the following devices from the main
PWB and then reattach it to the new
main PWB (see page 1-5-80).
EEPROM (YC14)
Memory DDR (YS1, YS3)
Y116520-3
Network connector
Memory
DDR (YS1)
Main PWB
Figure 1-5-127
1-5-79
2N8/2N7
Network connector
Projections
for ground
Main PWB
EEPROM
Memory
DDR (YS3)
(YC14)
YC14
YS1
YS3
Service Manual