9. Insert two hooks of the connector cover
to the holes of base of the machine
each.
10. Install the connector cover by using a
M4 x 8 screw.
11. Adhere the caution label after wiping
the bottom frame of this side of cassette
heater with alcohol.
*: Perform the maintenance mode U327 to configure the cassette heater control settings after a cassette
heater was installed.
Service Manual
Screw
Hook
Figure 1-2-8 3
Caution label
Figure 1-2- 84
1-2-5 4
2N8/2N7
Connector cover
Hook
Y116520-