Olivetti d-Copia 6500MF Plus Service Manual page 321

Item No.
U952 Maintenance mode workflow
Description
The maintenance modes configured in the machine or a USB flash device as a workflow must be
executed in succession.
Purpose
This allows maintenance mode to be preset as a template.
Setting
1. Press the start key.
2. Select the item.
Continue
Execute(USB)
Execute
Entry(USB)
Entry
Log
Method: [Execute]
1. Select [Execute].
2. Select the workflow.
* : The machine is preset with the following workflow at shipment.
SETUP
WARRANTY
MK-A
MK-C
EH SETUP
Data6
Data7
Data8
3. Press the start key.
Executes maintenance modes defined in a workflow in succession.
Y116520-3
Display
Restarting an abandoned workflow
Executes a workflow housed in a USB flash device
Executes a workflow stored in the machine
Exports a workflow housed in a USB flash device to the machine
Assigns a workflow in the machine manually
Displays a list of workflows recently executed
Display
U464/ U410/ U000/ U927/ U278
U089/ U000
U119/ U140/ U127/ U464/ U412/ U464/ U410/ U251
U464/ U410/ U251
U034/ U246
-
-
-
Description
Description
Description
1-3-199
2N8/2N7
Service Manual