Olivetti d-Copia 6500MF Plus Service Manual page 240

Item No.
U241 Checking the operation of the switches of the finisher
Description
Displays the status of each switches and sensors of 4000-sheet finisher.
Purpose
To check the operation of each switches and sensors of the 4000-sheet finisher.
Method
1. Press the start key.
2. Select the item to be checked.
Finisher
Mail Box
Booklet
Punch
Method: [Finisher]
1. Turn each switch or sensor on and off manually to check the status.
When the on-status of a switch or sensor is detected, that switch or sensor is displayed in
reverse.
Front Cover
MPT
Tray U-Limit
Tray HP2
Tray Middle
Tray L-Limit
Tray L-Limit(BL)
Tray Top
HP
Sub Tray Eject
Middle Tray Eject
Drum
Staple HP
Middle Tray
Width Front HP
Width Tail HP
Bundle Eject HP
Service Manual
Display
Checking the switch and sensor of the document finisher
Checking the switch and sensor of the mailbox
Checking the switch and sensor of the center-folding unit
Checking the switch and sensor of the punch unit
Display
DF front cover switch (DFFCSW)
DF eject cover switch (DFECSW)
DF tray sensor 1 (DFTS1)
DF tray sensor 2 (DFTS2)
DF tray sensor 3 (DFTS3)
DF tray sensor 4 (DFTS4)
DF tray sensor 5 (DFTS5)
DF tray upper surface sensor (DFTUSS)
DF paper entry sensor (DFPES)
DF sub eject sensor (DFSES)
DF middle eject sensor (DFMES)
DF drum sensor (DFDRS)
DF slide sensor (DFSLS)
DF middle tray sensor (DFMTS)
DF side registration sensor 1 (DFSRS1)
DF side registration sensor 2 (DFSRS2)
DF bundle discharge sensor (DFBDS)
Description
Description
Description
1-3-118
2N8/2N7
Y116520-