14. Remove the rear lower cover (see page
1-5-3).
15. Remove the right lower rear cover (see
page 1-5-5).
16. Remove two screws and then remove
the inlet unit.
17. Remove three screws.
18. Remove the feed drive unit.
Y116520-3
Inlet unit
Screw
Screw
Feed drive unit
Screw
Screw
Screw
Feed drive unit
1-5-109
Figure 1-5-178
Screw
Screw
Figure 1-5-179
Service Manual
2N8/2N7
Screw