Olivetti d-Copia 6500MF Plus Service Manual page 523

(14) Image center does not align with the original center.
Print example
1. Table scanning
Defective part
Original document
1
Contact glass assy Check the location the contact
2
Adjustment of the
scanner
3
2. DP-scanning first (front) page
Defective part
Original document
1
Adjustment of the
scanner
2
3. DP-scanning second (back) page
Defective part
Original document
1
Y116520-3
Check description
Check if the original document is
loaded correctly on the contact
glass.
glass is mounted.
Check the scanning adjustment
of the scanner.
Check description
Check if the original document is
loaded correctly in the DP.
Check the scanning adjustment
of DP scanning.
Check description
Check if the original document is
loaded correctly in the DP.
If the original document is not properly placed
on the contact glass, place it correctly.
Re-mount the contact glass if it is hanged off.
1. Perform maintenance mode U067,
Front.(see page 1-3-54)
2. Perform maintenance mode U411,
Table(Chart1)_Input.
(see page 1-3-152)
If the original document is not properly placed
in the DP, place it correctly.
1. Perform maintenance mode U072, Front.
2. Perform maintenance mode U411, DP
Auto Adj. (If a duplex scanning DP is
installed.)
3. Perform maintenance mode U411, DP
FaceUp(Chart2)_Input. (see page 1-3-152)
If the original document is not properly placed
in the DP, place it correctly.
1-4-195
Corrective Action
Corrective Action
Corrective Action
Service Manual
2N8/2N7