Olivetti d-Copia 6500MF Plus Service Manual page 300

Item No.
U465 Data reference for ID correction
Description
References the data related to ID correction.
Purpose
To check the corresponding data.
Method
1. Press the start key.
2. Select the item to be reference.
TCONT
Laser Power
Bias Calib
T7 CTD
Displaying: [TCOUNT]
Select [TCOUNT]. The current value is displayed.
Before(K)
After(K)
Displaying: [Laser Power]
1. Select [Laser Power]. The current value is displayed.
Display
K
Displaying: [Bias Calib]
1. Select [Bias Calib]. The current value is displayed.
Display
K
Displaying: [T7 CTD]
1. Select [T7 CTD]. The current value is displayed.
Display
K
Completion
Press the stop key.
* : The screen for selecting a maintenance item No. is displayed.
Service Manual
Display
Developer bias control value after ID correction
Scaling factor to the value determined in light amount calibration
Sensor value for toner thick layer calibration
T7 control value
Display
Developer bias control value before ID correction
Developer bias control value after ID correction
Scaling factor to the value determined in light amount calibration
Sensor value for toner thick layer calibration
T7 control value
Description
Description
Description
Description
Description
Description
1-3-178
2N8/2N7
Y116520-