Olivetti d-Copia 6500MF Plus Service Manual page 356

Check items
Conveying 1. Check that the foreign
guide, objects including scrips,
approaching paper clips, etc., do not exist
guide, feed- in the paper conveying paths.
shift guide
2. Check that the paper
conveying guide and the
separation needles are not
contaminated with toner,
paper dusts, etc.
3. Check that the paper
conveying guide has no
barrs, deformations, or
abrasions; and it is properly
mounted without being
floated.
4. Check that the guide.
Check that the guide is
smoothly operative when
manipulated.
5. Check that the guide.
Perform U033 to check the
operation of the solenoid to
sight-check or audio-check its
action. (see page 1-3-35)
Service Manual
Check description Corrective measures
If foreign objects such as scrips, etc., remain in the
paper conveying path, remove.
If dirty, clean the guide, ribs (by a cloth), and the
separation needles (by a cleaning brush).If the ribs of
the conveying guides were broken or deposited with
toner, replace.
Clean the conveying guide or the paper approaching
guide.Remove any protrusions including barrs.If floated,
fix it properly.If deformation or abrasion is observed,
replace.
If the guide is inoperative or won't operate smoothly,
replace the guide or the unit.
If the guide is inoperative or won't operate smoothly, re-
assemble the guide or replace the solenoid or the unit.
1-4-28
2N8/2N7
Y116520-