(2) Detaching and refitting the scanner wires
NOTE
When fitting the wires, be sure to use those specified below.
Machine front: (P/N: AVGR12655Y), gray
Machine rear: (P/N: AVGR12656C), black
Fitting requires the following tools
Two frame securing tools (P/N AVGR12740X)
Two scanner wire stoppers (P/N 417928N)
Procedure
1. Remove the exposure lamp
(see page 1-5-37).
2. Remove each screw and then remove
front and rear wire holder plates from
mirror 1 frame.
3. Remove the mirror 1 frame.
Service Manual
Mirror 1 frame
Cutting lack part
Front wire holder plate
Screw
Mirror 1 frame
1-5-40
Cutting lack part
Rear wire holder plate
Mirror 1 frame
Figure 1-5-66
2N8/2N7
Screw
Y116520-3