Olivetti d-Copia 6500MF Plus Service Manual page 529

Defective part
HDD
3
ISC PWB
4
CCD PWB
5
Main PWB
6
3. DP-scanning second (back) page
Defective part
DP_SHD PWB
1
DP_SATA cable
2
DP_CIS
3
Main PWB
4
Y116520-3
Check description
Check the wires to the HDD in
conduction. Check the connector
for connection. Check the con-
nector pins for distortion.
The ISC PWB is defective.
The CCD PWB is defective.
The main PWB is defective.
Check description
Check the CIS and the SHD
PWB is properly connected.
Check the FFC cable between
the SHD PWB and I/F PWB is
properly connected. Or, verify
conduction of the wire.
CIS is defective.
The main PWB is defective.
1. Reinsert the connector if its connection is
loose.
2. Check the wires and connetctors, and
replace if faulty.
3. Replace the HDD or the SATA wire.
Replace the ISC PWB and perform U411.
(see page 1-3-152)
Replace the ISU and perform U411.
(see page 1-3-152)
Replace the main PWB.(see page 1-5-74)
Reinsert the connector if the PWB was loosely
inserted.If not cured, replace the PWB.
Reinsert the connector if its connection is
loose. Or, if conduction is lot, replace the wire.
Replace the CIS and perform U091 and U411.
(see page 1-3-65,1-3-152)
Replace the main PWB.(see page 1-5-74)
1-4-201
Corrective Action
Corrective Action
Service Manual
2N8/2N7