Olivetti d-Copia 6500MF Plus Service Manual page 363

Jam types
DF conveying sensor
non arrival jam
(J610X)
DF conveying sensor
stay jam (J611X)
DF intermediate sen-
sor stay jam (J631X)
DF main tray ejection
stay JAM (J641X)
DF eject sensor non
arrival jam (J6500)
DF eject sensor stay
jam (J651X)
Y116520-3
Check description
2. Check if the jammed
paper has a dog-ear.
3. Check if dog-ears are
caused within the
punch unit.
1. If there is not the
jammed paper which is
causing J631, at the
paper processing area,
check to see if the
actuator (DF middle
sensor) is operative.
Corrective measures
2.If a down-curled sheet is jammed at the DF
conveying guide ribs by being dog-eared, replace the
DF conveying lower guide.
If a welding protrusion on the coveying side causes
paper to be trapped, try replacing the punch unit.
Re-mount the actuator.
1-4-35
2N8/2N7
Service Manual