3NH
1-2-3
Installing the cassette heater (option)
Installing the cassette heater requires the following component:
Cassette heater (P/N AVGR13378M): for 220 to 240 V specifications only
Two (2) M4 x 8 S tight screws
Procedure
1. Remove cassette 3 and 4.
2. Remove the three screws holding the paper
feeder rear cover and then the cover.
3. Fasten the cassette heater cable to the wire
saddle.
4. Pass the cassette heater cable to the
machine rear through the cable hole in the
machine right.
5. Attach the cassette heater using the two M4
x 8 S tight screws.
6. Release the wire of paper feeder from the
wire saddle.
7. Remove the connector holder from the wire
of the paper feeder.
1-2-4
M4 x 8
S tight screws
Connector holder
Service Manual
Cable hole
Wire saddle
Cassette heater
Figure 1-2-4
Wire of paper feeder
Wire saddle
Figure 1-2-5
Y112350-4