Honda Accord 2008 Manual page 2650

07/11/02 10:04:57 61TA0000_230_0206
18. Turn the ignition switch to ON (II).
19. Check for continuity between the terminal of
navigation unit connector B (32P) according to the
table.
From terminal
B4 (ORN)
B20 (PUR)
＊０７
Is there continuity?
YES
navigation control unit and climate control unit.
−
NO
21-164).
To terminals
B20 (PUR), B21 (BRN)
B21 (BRN)
NAVIGATION UNIT CONNECTOR B (32P)
Wire side of female terminals
− Repair short in the wire(s) between the
Replace the climate control unit (see page
DTC 2601: Display Diag: Connect
NOTE:
• Check for B-CAN DTCs and resolve them before
troubleshooting.
• Before you troubleshoot, make sure to follow the
general troubleshooting information (see page
23-126).
1. Clear the hard error code (see page 23-136).
2. Turn the ignition switch to LOCK (0), and then back
to ON (II).
3. Go into the Diagnostic Menu and select the Self-
Diagnosis Mode in the Select Diagnosis Items
menu (see page 23-172).
4. Check the System Links.
Is the Display icon red?
YES − Go to step 5.
NO − Intermittent failure, the system is OK at this
time.
ＴＡ０８ＡＮ１Ｋ７６１０００Ｎ２６０１ＦＡＡＴ００
(cont'd)
23-205 23-205