07/11/02 10:05:00 61TA0000_230_0218
DTC 2707:
MIC Diag
NOTE: Before you troubleshoot, make sure to follow the
general troubleshooting information (see page 23-126).
1. Clear the hard error code (see page 23-136).
2. Turn the ignition switch to LOCK (0), and then back
to ON (II).
3. Go into the Diagnostic Menu and select the Self-
Diagnosis Mode in the Select Diagnosis items
menu (see page 23-172).
4. Select the System Links.
Is the Mic icon red?
YES
−
Go to step 5.
−
NO
Go to step 8.
5. Turn the ignition switch to LOCK (0).
6. Check for poor connections or loose terminals at
HandsFreeLink control unit 28P connector, HFL/
navigation/ANC microphone 7P connector, and
navigation control unit D (5P) connector.
Are the connections OK ?
YES
−
Go to step 6.
−
NO
Repair poor connections or loose terminals.
7. Check for DTCs with the HDS.
Is DT C B17 7 5 or B17 7 6 indicated?
YES
−
Troubleshooting the indicated DTC.
NO
−
Go to step 10.
8. Select the Mic in the System Links.
9. Select the Talk Switch icon in steering Switch, then
check the Mic Level (see page 23-185).
Is the microphone level OK ?
−
YES
Intermittent failure, the system is OK at this
time.
NO
−
Replace the HFL/navigation/ANC microphone
(see page 23-242).
10. Turn the ignition switch to LOCK (0).
11. Disconnect the HFL/navigation/ANC microphone 7P
connector.
TA08AN1K761000N2707FAAT00
(cont'd)
23-217