Honda Accord 2008 Manual page 2682

07/11/02 10:05:51 61TA0000_230_0238
The Acura Globe Screen (not the Honda
Globe Screen) appears every time the vehicle
is started
NOTE: The navigation DVD and the navigation unit are
correct for the vehicle, but earlier and possibly later
versions of the navigation software may have been
installed. When this happens, the software may not be
recognized by the navigation unit, and could cause the
navigation unit to revert to a Honda model profile.
1. Remove the navigation unit and verify that the
parts number printed on the navigation unit label is
the correct one for the year/model vehicle you are
working on.
Is the correct navigation unit installed based on
the parts number?
YES − Go to step 2.
−
NO Replace the navigation unit with the correct
unit for the year/model vehicle you are working
on.
2. Reinstall the navigation unit.
3. Remove the navigation DVD.
4. Note the software version marked on the DVD label
and verify if it is the correct version for the vehicle
year/model you are working on by checking any
official Honda service website and searching for
any related service information about the
navigation system and navigation software.
Is the sof tware version marked on the DV D label
the correct one f or the vehicle year/ model you are
working on?
YES − Replace the navigation unit (see page 23-240).
NO − Go to step 5.
5. Obtain the correct version DVD (see page 23-129)
and install it.
Does the navigation system boot-up with the
Honda Globe Screen?
YES − The problem is resolved, troubleshooting is
complete.
−
NO The system still shows Honda Globe Screen.
Replace the navigation unit (see page 23-240).
ＴＡ０８ＡＮ１Ｊ３６１００００００００ＦＡＡＴ３９
23-237