Honda Accord 2008 Manual page 2697

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 10:06:27 61TA0000_230_0253

Electrical Compass

Electrical Compass Zone Selection and Calibration (cont'd)

7. Turn the selector knob (B) to select CALIBRATION.

8. Press the selector knob (B) to enter your selection.

The display shows PUSH CAL START.

9. Press the selector knob (B), the compass display

will blink and the CAL indicator is shown.

10. When the calibration is successfully completed, the

CAL indicator goes off and the compass display will

stop blinking and show an actual heading.

• While setting, pressing the RETURN button (C)

returns to the previous display. Pressing the

MENU button (A) cancels the compass setting

• The audio system is not related to the compass

system. Even if the compass system is

calibrating, the display returns to the normal

display which you selected last.

• Do this procedure in an-open area, away from

buildings, power lines, and other vehicle.

Chapters

Table of Contents