07/11/02 10:04:59 61TA0000_230_0216
DTC 2702:
GPS Diag: Receiver in Navi ECU
NOTE:
• Before you troubleshoot, make sure to follow the
general troubleshooting information (see page
23-126).
• Make sure the vehicle is parked outside and away
from buildings.
• Check for electronic aftermarket accessories
(possibly hidden) mounted near the GPS antenna or
the navigation unit.
1. Clear the hard error code (see page 23-136).
2. Turn the ignition switch to LOCK (0), and then back
to ON (II).
3. Go into the Diagnostic Menu and select the Self-
Diagnosis Mode in the Select Diagnosis items
menu (see page 23-172).
4. Select the System Links, then select the GPS Ant.
Is Receiver in Navi ECU OK indicated?
YES
−
Intermittent failure, the system is OK at this
time.
NO
−
Replace the navigation unit (see page 23-240).
TA08AN1K761000N2702FAAT00
DTC 2705:
HFL Diag
NOTE: Before you troubleshoot, make sure to follow the
general troubleshooting information (see page 23-126).
1. Clear the hard error code (see page 23-136).
2. Turn the ignition switch to LOCK (0), and then back
to ON (II).
3. Go into the Diagnostic Menu and select the Self-
Diagnosis Mode in the Select Diagnosis items
menu (see page 23-172).
4. Select the System Links.
Is the HF L icon red?
YES
−
Go to step 5.
−
NO
Intermittent failure, the system is OK at this
time.
5. Turn the ignition switch to LOCK (0).
6. Turn the ignition switch to ON (II).
7. Check for DTCs with the HDS.
Are DT Cs of HF L indicated?
YES
−
Do the HFL DTC troubleshooting.
−
NO
Do the HFL unit troubleshooting.
TA08AN1K761000N2705FAAT00
23-215
23-215