Honda Accord 2008 Manual page 2626

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 10:04:13 61TA0000_230_0182

This diagnostic tests the interface dial, and the buttons

that surround it. For this model, the interface dial and

buttons do not use the GA-Net bus for communications.

To complete the test, touch each button on the vehicle's

control panel, and move the interface dial to each

indicated position. As each function is tested, the

corresponding button on the display should highlight.

To exit, push in and hold the selector knob.

NOTE: You cannot use the onscreen return button to

exit this function

Keep Pushing to Return.

This screen gives a quick test of the yaw sensor

functionality based on the two voltages Sensor and

Offset. For more information see the Yaw Rate

Zero Point Output

Output Value

Current Offset

Temperature in ECU xx°C

Chapters

Table of Contents