Honda Accord 2008 Manual page 2686

07/11/02 10:06:20 61TA0000_230_0242
Navigation Display Unit Removal/
Installation
1. Remove the audio unit (see page 23-109), then
remove the center display visor (see page 20-158).
2. Remove the screws and bolts, then pull out the
navigation display unit (A).
＊０１
A
3. Install the unit in the reverse order of removal. Be
careful not to drop the forward screw behind the
dashboard.
ＴＡ０８ＡＮ１Ｊ３６１０００４２５０１ＫＤＡＴ００
Interface Dial Removal/Installation
1. Remove the audio unit (see page 23-109).
2. Remove the screw and harness cover (A).
3. Remove the screws and interface dial (A).
NOTE: If the hard buttons do not work, but the jog
dial does, recheck the interface dial connector (B)
connection.
A
4. Install the dial in reverse order of removal.
ＴＡ０８ＡＮ１Ｊ３６１０００３５０４９ＫＤＡＴ０２
＊０１
A
＊０２
B
23-241 23-241