Honda Accord 2008 Manual page 2637

07/11/02 10:04:17 61TA0000_230_0193
Navigation System
System Diagnostic Mode (cont'd)
Why won't the Export or Import functions
work? What do I check as part of
troubleshooting?
Are there any error messages to tell me
what is wrong?
23-192
Question
• The card may not be fully inserted into the slot. Eject the card, and
inspect for warping or damage to the edge connector. Never use
excessive force to insert a card. This can result in damage to the
pins in the rear of the slot.
• The card may not contain files that are recognized by the new
navigation control. Navi date can only be transferred between
navigation control unit with the same Model code, and with the
same navi Program flash version.
• The flash memory chip type may not be accepted by the system.
Only Compact Flash, and ATA cards have been tested.
• The card's PCMCIA adaptor may be preventing a known good card
from being recognize. Avoid multi slot type PCMCIA adaptors that
accept several different flash memory types
• The card may be full and as a result the files are stored, but
without any data. Export and import appear to function, but move
nothing. Delete unused files from the card.
• There may not be any files on the card. If the card has a write
protection switch, make sure it is turned off before attempting to
use the Export function.
• Although flash memory chips are reliable, occasionally they
develop bad sectors or other formatting errors that prevents them
from accepting files. The card should be reformatted using the
FAT format.
• The card may have been formatted using the format NTFS. Only
the FAT format is accepted by the system.
• Hard Disc Drive (HDD) cards may not work properly in the system
and can overheat or quit functioning, particularly in a hot vehicle.
They are not recommended.
• Before doing the import function, ensure that the customer's
original DVD is loaded into the new core and working properly.
There are no error message associated with the Import/Export
feature. Follow the troubleshooting steps above.
Answer