Honda Accord 2008 Manual page 2654

07/11/02 10:04:58 61TA0000_230_0210
DTC 2602: Display Diag: ROM
NOTE:
• Check for B-CAN DTCs and resolve them before
troubleshooting.
• Before you troubleshoot, make sure to follow the
general troubleshooting information (see page
23-126).
1. Clear the hard error code (see page 23-136).
2. Turn the ignition switch to LOCK (0), and then back
to ON (II).
3. Go into the Diagnostic Menu and select the Self-
Diagnosis Mode in the Select Diagnosis Items
menu (see page 23-172).
4. Select the Display.
Is the ROM NG?
YES − Replace the navigation display unit (see page
23-241).
NO − Intermittent failure, the system is OK at this
time.
ＴＡ０８ＡＮ１Ｋ７６１０００Ｎ２６０２ＦＡＡＴ００
DTC 2603: Display Diag: RAM
NOTE:
• Check for B-CAN DTCs and resolve them before
troubleshooting.
• Before you troubleshoot, make sure to follow the
general troubleshooting information (see page
23-126).
1. Clear the hard error code (see page 23-136).
2. Turn the ignition switch to LOCK (0), and then back
to ON (II).
3. Go into the Diagnostic Menu and select the Self-
Diagnosis Mode in the Select Diagnosis Items
menu (see page 23-172).
4. Select the Display.
Is the RAM NG?
YES − Replace the navigation display unit (see page
23-241).
NO − Intermittent failure, the system is OK at this
time.
ＴＡ０８ＡＮ１Ｋ７６１０００Ｎ２６０３ＦＡＡＴ００
23-209 23-209