Honda Accord 2008 Manual page 2629

07/11/02 10:04:14 61TA0000_230_0185
Navigation System
System Diagnostic Mode (cont'd)
Save Users Memory
When replacing the navigation unit, this function allows
the dealer to transfer the customer's personal data to
the new navigation unit.
This is similar to saving and entering the customer's
audio presets when replacing an audio unit. The
transferred information includes their Setup settings
and personal addresses. The dealer inserts a PC card
(like the PC card in the HDS), and then selects the Save
Users Memory function. The two functions in this
diagnostic screen are Export. Export and Import saves
the customer's data to the PC card, and Import moves
the PC card files to the new core.
See the FAQs below for information regarding PC cards,
and the use of this function.
＊２７
Export
Select this button to move the customer's data from the
original navigation unit to the PC card. Select YES on
the Export User Data Confirmation screen. The process
takes only a couple of seconds. The system stores two
files on the card.
＊２８
23-184
Save Users Memory
Return
EXPORT
IMPORT
Save Users Memory
Return
Export User Data ？
Yes No
Import
After installing the customer's original DVD in the new
navigation control unit, allow the system to boot up.
Insert the PC card in the new navigation control unit and
enter the navigation diagnostic mode.
Save Users Memory
EXPORT
Select YES on the Import Confirmation screen.
Import moves the two files stored by the Export process
from the PC card to the new navigation unit. When the
transfer is finished (a few seconds) the system will
automatically reboot. After the system reboots, remove
the PC card from the PC slot.
If the Import button is grayed out, follow the
troubleshooting in the FAQs below. The customer's
files can only be transferred to a new navigation control
unit if the Model and the Program Flash shown on the
Version screen are the same. These files cannot be
transferred from an Accord to a Civic, or from an
Accord with version 1.07.00 to a another Accord with
version 1.32.00.
Return
IMPORT
＊２９