07/11/02 10:05:00 61TA0000_230_0219
Navigation System
DTC Troubleshooting (cont'd)
12. Turn the ignition switch to ON (II).
13. Measure the voltage between the body ground and
HFL/navigation/ANC microphone 7P connector
terminals No. 6 and No. 7 individually.
*01
HFL/NAVIGATION/ANC MICROPHONE 7P CONNECTOR
Are there battery voltage?
YES
NO
−
23-218
ACC (PUR)
Wire side of female terminals
−
Go to step 14.
Repair open in the wire(s).
14. Turn the ignition switch to LOCK (0).
15. Check for continuity between the HFL/navigation/
ANC microphone 7P connector terminal No. 1 and
body ground.
HFL/NAVIGATION/ANC MICROPHONE 7P CONNECTOR
+
B (WHT)
Is there continuity?
YES
−
microphone (see page 23-242).
NO
−
GND (BLK)
Wire side of female terminals
Replace the HFL/navigation/ANC
Repair open in the ground wire to G501.
*02