Honda Accord 2008 Manual page 2646

07/11/02 10:04:56 61TA0000_230_0202
DTC 1402: Audio Error 2
NOTE:
• Check the vehicle battery condition first.
• Before you troubleshoot, make sure to follow the
general troubleshooting information (see page
23-126).
1. Clear the hard error code (see page 23-136).
2. Turn the ignition switch to LOCK (0), and then back
to ON (II).
3. Check for the hard error code (see page 23-134).
Is DT C 1402 indicated?
YES − Go into the Self-diagnostic Function in the
audio unit, and check CD Error Codes (see page
23-57). If the error codes is not indicated, go to
Symptom Troubleshooting for the Disc changer.
NO − Intermittent failure, the system is OK at this
time.
ＴＡ０８ＡＮ１Ｋ７６１０００Ｎ１４０２ＦＡＡＴ００
DTC 1403: Audio Error 3
NOTE: Before you troubleshoot, make sure to follow the
general troubleshooting information (see page 23-126).
1. Clear the hard error code (see page 23-136).
2. Turn the ignition switch to LOCK (0), and then back
to ON (II).
3. Check for the hard error code (see page 23-134).
Is DT C 1403 indicated?
−
YES Replace the navigation unit (see page 23-240).
NO − Intermittent failure, the system is OK at this
time.
ＴＡ０８ＡＮ１Ｋ７６１０００Ｎ１４０３ＦＡＡＴ００
23-201 23-201