3-2-3. Amplifier
3-2-4. Assembling the Fiber Unit to the Amplifier
Make the fiber unit portion having the projection faced toward the amplifier portion without
LED, and then insert the fiber unit all the way in. After the fiber unit has been inserted all the
way in, turn the connector clockwise to make sure that the fiber unit is not disconnected.
This mark is utilized as a gauge.
Maintenance Guide
Left OCC camera assembly
Figure 3-2-3-1 Assembling the Amplifier
Fiber unit
Projection portion
Figure 3-2-4-1 Assembling the Fiber Unit
3-5
Camera bracket
SM6030502TN (×2)
Bad mark sensor amplifier
Amplifier
Rev. 1.0