JUKI KE-3010 Maintenance Manual page 274

13-2-4-2. Updating the C-drive
This system uses the C-drive write-protect function called "EWF". If the system is installed or if
the setting, such as network setting is changed, it is necessary to update the C-drive.
1) Click the [Start] button of Windows and run Command Prompt from Programs in the Start
menu.
2) In the Console window (DOS screen), type "ewfmgr C: -commit".
The following screen will appear.
3) Select [Turn Off Computer] from the Start menu of Windows to restart the system.
The contents of the overlay are then overwritten into the C-drive.
∗ CAUTION
If the system is started up without updating of the C-drive, the installation information is cleared
from the C-drive due to C-drive protect function, causing the system not to be started up correctly.
Maintenance Guide
13-29
Rev. 2.0