Superimpose Board (40048082) - JUKI KE-3010 Maintenance Manual

14-3-8.

SUPERIMPOSE Board (40048082)

[Functions]
This SUPERIMPOSE board controls up to two
superimpose screens from the CPU board
through the RS-232C. Additionally, this board
also captures the touch panel signals through
the RS-232C.
[DIP-switch settings]
There are no DIP-switches on the
SUPERIMPOSE board.
[Meaning of LED]
There are no LEDs on the SUPERIMPOSE
board.
[Adjustment items after replacement]
There are no particular adjustment items.
[Replacement procedure]
Before starting the replacement work, always turn OFF the main power, main circuit
breaker, and main switch.
Since the SUPERIMPAUSE BOARD is assembled into the PCB support located at the
lower portion of the control box, take out the PCB support and replace it.
After the PCB support has been taken out, remove SL4030691SC (4 pcs.) to detach the
KEYBOARD/MOUSE selector (40003281).
Remove SL4030691SC (2 pcs.) and HX003540000 (4 pcs.) to detach the SUPERIMPOSE
board.
Replace the detached SUPERIMPOSE board with a new one and reassemble the parts
and components in the reverse order of disassembly.
Maintenance Guide
14-26
Rev. 2.0