Adjusting The Sensor; Mounting The Driver Bracket - JUKI KE-3010 Maintenance Manual

15-5. Adjusting the Sensor

Figure 15-5-1

15-6. Mounting the Driver Bracket

5-phase stepping motor
driver for support table
HX004200000
HX005450000 (for EN)
Note) The mounting position is the inside of the Y-axis frame located at the right far
position of the machine.
Maintenance Guide
Proximity sensor: 40002120
SL4041091SC 4 pcs.
Figure 15-6-1
15-7
AWC ORG SENS ASM
5-phase stepping motor
driver for AWC
HX004200000
HX005450000 (for EN)
40094350
Driver unit bracket
Rev. 2.0