JUKI KE-3010 Maintenance Manual page 152

Figure 5-6-2-2 Front Reference: Right Sensor, Rear Reference: Left Sensor
<Adjusting the sensitivity>
1) Make an adjustment so that a (matte) black glass epoxy PWB placed on the transport path
can be detected.
2) Place a (matte) black glass epoxy PWB under the sensor and rotate the sensitivity
adjustment knob of the sensor counterclockwise. Then gradually rotate it clockwise up to the
position at which the specified PWB is detected.
∗ If any black glass epoxy PWB is not available, use the PWB having the darkest color of
those to be used.
Maintenance Guide
40092568
40092567 RIGHT SENS CABLE ASM
SL4031291SC
EA9500B0000
5-11
The cable should have
an allowance when the
movable part is moved
in the direction indicated
by an arrow mark.
LEFT_SENSOR_ASM
SCREW M3×L12
CABLE_BAND
Rev. 2.0