JUKI KE-3010 Maintenance Manual page 239

4) Adjust the height of a newly mounted sensor. (The difference between the left and right height
levels is 0.1 mm or less.)
● Feeder float sensor (Specific mechanical specifications and specifications common to both
mechanical/ETF) (Height from the top of the mechanical bank to the top of the sensor)
(Mechanical, outside machine)
(Rear side only)
● Feeder float sensor (Specific ETF specifications) (Height from the top of the electric bank to
the top of the sensor)
Top of electric bank rail
Maintenance Guide
Feeder float sensor
Feeder float sensor (Mechanical, inside
machine)
Feeder float sensor
(ETF)
Figure 12-1-7
Feeder float sensor
(ETF)
Figure 12-1-8
12-6
Rev. 2.0
Specific ETF
specifications
Specific mechanical
specifications