9-3-1. Replacing the Bank PCB
1) Remove the mounting bolts (hexagon socket head cap bolt with washer, M3 L=8) to detach
the PCB box cover.
2) Disconnect the connectors (cables) from the electric bank PCB.
3) Remove the PCB mounting screws (round head screw with washer, M3 L=8) to replace the
PCB.
4) Reassemble the components in the reverse order of disassembly.
Bank PCB box assembly
Maintenance Guide
PCB mounting screw
(6 locations)
40084841
ELEC BANK 10 PCB ASM
9-23
PCB BOX cover mounting bolts
(4 locations)
Rev. 2.0