Setting The Switches On The Bad Mark Sensor Assembly; Replacing The Hms; Replacing The Hms Head - JUKI KE-3010 Maintenance Manual

3-2-5. Setting the Switches on the Bad Mark Sensor Assembly

Use as it is the amplifier in the factory-settings.
Output timer
change-over switch
→ NORMAL

3-3. Replacing the HMS

3-3-1. Replacing the HMS Head

SM6032002TN
SEMS cap bolt M3×25
Maintenance Guide
Operation mode
change-over switch
→ L ON
Figure 3-2-5-1 Switch Settings
Figure 3-3-1-1 Replacing the HMS Head
Mode switch
→ AUTO
3-6
Rev. 1.0
SET button