JUKI KE-3010 Maintenance Manual page 46

2) Detach the FC support and FC rubber. Then cut and remove the tie-up band.
3) Perform the same work in step 2) at the fixed end of the cableveyor.
4) Detach the cover of the plastic rail and remove the cable to be replaced.
Maintenance Guide
FC_SUPPORT
Figure 1-6-1-2 Movement End of Cableveyor
FC_SUPPORT_X
FC_RUBBER
Figure 1-6-1-3 Fixed End of Cableveyor
FC_RUBBER
1-35
Rev. 2.0