Replacing The System Disk; Replacing The Ssd - JUKI KE-3010 Maintenance Manual

13-2. Replacing the System Disk

In the KE-3010/3020V/3020VR, the system disk configuration is stored into the Solid State Disk
(hereafter referred to as "SSD").
The inside of the SSD is separated into two portions, "C-drive" that contains Windows or
operating system, such as RTX, and "D-drive" that contains the system programs, parameters,
and production program files.

13-2-1. Replacing the SSD

The SSD is a boot disk of the machine that contains Windows or operating system, such as RTX
necessary to operate the KE-3010/3020V/3020VR. Additionally, the SSD is mounted on the CPU
board.
To replace the SSD, parameter files necessary to operate the main unit are required in addition to
the required components shown below.
When the MS parameters have been updated, select [Manage Control Data] from [File] on the
menu bar to back up the data.
Furthermore, back up production program files into USB memory or other media.
You must always follow the instructions described in this manual when replacing the SSD.
13-2-1-1. Required Components
KE-3010/3020V/3020VR Environment Disk (SSD)
It is absolutely required that the KE-3010/3020V/3020VR contains the Environment Disk
for KE-3010/3020V/3020VR only (OS environment, such as Windows or OS RTX
necessary to operate the system has already been installed).
Language
Common (Japanese,
English, and Chinese)
KE-3010/3020V/3020VR system program installation disk
The system program installation disk contains the software designed for the
KE-3010/3020V/3020VR. All system programs are saved into this disk. When installing the
system programs, it is necessary to specify a model (only when installing the system
programs newly).
∗
For details about how to install the main unit software into the SSD for the white list type
antivirus software (optional), see section 13-2-6.
Maintenance Guide
Table 13-2-1-1-1 SSD Part No.
OS
WindowsXP
ENVIRONMENT SYSTEM DISK 132V
13-4
Part name
Rev. 2.0
Par No.
40113004