Replacing The Wait/Stop/C-Out Sensors; Replacing The Wait Sensor (M And L Board Specifications) - JUKI KE-3010 Maintenance Manual

5-7. Replacing the WAIT/STOP/C-OUT Sensors

5-7-1. Replacing the WAIT Sensor (M and L Board Specifications)

1) Assemble the WAIT sensor for the M board specifications as shown in the Figure below
according to the flow direction.
Front reference: Left → Right
Rear reference: Right → Left
Figure 5-7-1-1 WAIT Sensor (M Board Specifications)
2) Assemble the WAIT sensor for the L board specifications as shown in the Figure below
according to the flow direction.
Front reference: Left → Right
Rear reference: Right → Left
Figure 5-7-1-2 WAIT Sensor (L Board Specifications)
Maintenance Guide
WAIT sensor
Front reference: Right → Left
Rear reference: Left → Right
WAIT sensor
40110064
SL4031091SC
5-12
Front reference: Right → Left
Rear reference: Left → Right
WAIT SENSOR
SCREW M3×L12
Rev. 2.0