JUKI KE-3010 Maintenance Manual page 348

(2) Maintenance key switch
Switch key supplied
with the machine
• Parts used
Key cover (HA00535003A), Key switch actuator (HA005350020), Bezel (HA005520020)
<Assembly procedure>
Fit the bezel (black) into the cover panel.
Push the key cover into the key switch actuator until a click is heard.
Insert the actuator (assembled at 3) into the black bezel, insert the bezel (silver) from the
back of the panel and secure it with the fixing nut.
(3) LEFT FEEDER, RIGHT FEEDER, CONSOLE CHANGE switches
• Parts used
Use the L_FEEDER SW ASM (40048035), R_FEEDER SW ASM (40048034) or CONSOLE
SW ASM (40048036).
Bezel (green) with a lens: bezel (HA005530010), lens (HA005530020); to be used for the
LEFT_FEEDER and RIGHT_FEEDER SW
Bezel (white) with a lens: bezel (HA005530010), lens (HA00553002A); to be used for the
CONSOLE CHANGE
<Assembly procedure>
Remove the fixing nut of the bezel and fit the bezel. Then tighten the fixing nut.
Finally, fit the switch element (with a cable) from the back of the panel. Direction of the
switch element is not important. It can be assembled in either direction.
Maintenance Guide
Bezel for key
switch
Key switch
actuator
14-51
Bezel
Rev. 2.0