JUKI KE-3010 Maintenance Manual page 33

<XL board specifications>
159.5
144.5
FRONT
Front side (Y negative limit sensor)
Front side 2 (Y near sensor)
Rear side 2 (Y ++ limit sensor)
Clearance between the limit sensor and the dog
Maintenance Guide
Figure 1-3-2-2 XL Board Specifications
Distance from the split pin mounting center position on the front of the
base frame to the center of the sensor: 144.5 mm
Distance from the split pin mounting center position on the front of the
base frame to the center of the sensor: 159.5 mm
Distance from the split pin mounting center position on the rear of the
base frame to the center of the sensor: 99 mm
1.8 to 2.5 mm (target: 2.0 mm)
1-22
Rev. 2.0
205
99
REAR