JUKI KE-3010 Maintenance Manual page 29

<XL board specifications (Example of KE-3020V and VR)>
Stopper rubber
affixing surface
Figure 1-3-1-2 XL Board Specifications (Example of KE-3010V)
Left (X negative limit sensor)
Center (X-home position sensor)
Right (X positive limit sensor)
Clearance between the limit
sensor and the dog
Maintenance Guide
X negative limit sensor
X-home position sensor
Distance between the stopper rubber affixing surface of the X-frame end L
and the center of the sensor: 116.5 mm (KE-3010: 93.2 mm)
Distance between the stopper rubber affixing surface of the X-frame end L
and the center of the sensor: 127.5 mm (KE-3010: 104.2 mm)
Distance between the stopper rubber affixing surface of the X-frame end R
and the center of the sensor: 73.5 mm (KE-3010: 119.7 mm)
0.8 to 1.5 mm (target: 1.0 mm)
Stopper rubber
affixing surface
X positive limit sensor
1-18
Rev. 2.0