JUKI KE-3010 Maintenance Manual page 254

6) Changing "PnP Configuration"
Move the cursor to "PnP Configuration" with the <↑> or <↓> key and press the <ENTER> key.
7) "PnP Configuration" screen
The "PnP Configuration" screen displays the contents shown below.
Option ROM Scan:
Latency Timer:
PCI IRQ A:
PCI IRQ B:
PCI IRQ C:
PCI IRQ D:
PCI IRQ E:
PCI IRQ F:
PCI IRQ G:
PCI IRQ H:
F1 Help
Esc Exit
Figure 13-2-2-1-4 BIOS Screen (Advanced: PnP Configuration)
8) Changing "PCI IRQ"
When the screen moves to the "PnP Configuration" screen, move the cursor to each "PCI
IRQ" and change the numeric value to that described below. Move the cursor with the <↑> or
<↓> key and change the numeric value with the <+> or <-> key.
9) Changing "PCI IRQ A"
Move the cursor to "PCI IRQ A" and change the numeric value to "5".
10) Changing "PCI IRQ B"
Move the cursor to "PCI IRQ B" and change the numeric value to "9".
11) Changing "PCI IRQ C"
Move the cursor to "PCI IRQ C" and change the numeric value to "5".
12) Changing "PCI IRQ D"
Move the cursor to "PCI IRQ D" and change the numeric value to "5".
13) Changing "PCI IRQ E"
Move the cursor to "PCI IRQ E" and change the numeric value to "5".
14) Changing "PCI IRQ F"
Move the cursor to "PCI IRQ F" and change the numeric value to "11".
Maintenance Guide
Phoenix TrustedCore (tm) Setup Utility
Advanced
PnP Configuration
[Enabled]
[Default]
[5]
[9]
[5]
[5]
[5]
[11]
[10]
[5]
↑↓Select Item -/+ Change Values
Select Menu Enter Select
Item Specific Help
Initialize device
expansion ROM
(PMC only)
F9 Setup Defaults
Sub-Menu F10 Save and Exit
13-9
Rev. 2.0