8-3. Replacing the Light Boards
8-3-1. Transmission Light Board, Coaxial Light Board
1) In the case of the coaxial light board, detach the cylinder, remove the bolts
replace the board.
2) In the case of the transmission light board, remove the SEMS bolts
board.
After the board has been replaced, make sure the cables are reconnected.
SL4030691SC
M3 × 6 SEMS bolt (× 4)
Maintenance Guide
Figure 8-3-1
8-4
and then replace the
40066577
BACK LIGHT PCB ASM
SL6030692TN
M3 × 6 bolt (× 2)
40108599
S-COAXIAL-LIGHT PCB ASM
Rev. 2.0
and then