Wiring Around The Head - JUKI KE-3010 Maintenance Manual

1-6-7. Wiring around the Head

Connect the cables coming from the XY veyor-cable (40113621) and XY veyor-cable XL
(40092637) to the following locations. When connecting the cables, do not bend any cable
excessively nor apply any load. In particular, carefully handle the fiber cables.
1) Insert the HEAD-CN13, HEAD-CN15, EN1, and HEAD-CN2 into the locations shown in the
Figure 1-6-7-1.
2) Insert the ZTA-CNP1, ZTB-CNP1, ZTC-CNP1, and ZTD-CNP1 into the locations shown in
the Figure 1-6-7-2.
3) Relay the SENS X at the location shown in the Figure 1-6-7-2. Secure the connectors and
cables.
CN2
SENS X
Maintenance Guide
EN1
CN15
Figure 1-6-7-1
Figure 1-6-7-2
1-48
CN13
ZTD-CNP1
ZTC-CNP1
ZTB-CNP1
ZTA-CNP1
Rev. 2.0