JUKI KE-3010 Maintenance Manual page 119

∗ If the tie-up bands have been cut when detaching the FMLA sensor, bundle the cables as
shown in the Figure below.
Connector on far side of
left sensor
40080206
LA SENSOR BEAR CABLE ASM
∗ Insert the cable assembly firmly.
Connector on front side
of left sensor
Note: Fix the connector
cable at a position
where it is not in
contact with the
release bar.
Connector on front side
of right sensor
Maintenance Guide
EA9500B0100
Tie-up band (small)
EA9500B0200
Tie-up band (medium)
Figure 2-4-3-2
2-15
Rev. 2.0
E93457210A0
LA SENSOR CONNECT
CABLE ASM
∗ Insert the cable
assembly firmly.
EA9500B0100
Tie-up band (small)