9-3-3. Replacing the Connector for Off-Line Setup
1) Disconnect the connector for the off-line setup from the E trolley cover R.
2) Disconnect the connector connecting the cable of the connector for the off-line setup and the
relay cable to the electric bank PCB. After that, replace the connector for the off-line setup.
3) Reassemble the components in the reverse order of disassembly.
Figure 9-3-1 Replacement of Connector for Off-Line Setup
Maintenance Guide
9-25
Trolley cover R
40084841
EF ARRANGE CBL 1
BRACKET ASM
Tape guide bracket R
Rev. 2.0