Replacing The Left And Right Sensors; Replacing The Left And Right Sensors (M And L Board Specifications) - JUKI KE-3010 Maintenance Manual

5-6. Replacing the LEFT and RIGHT Sensors

5-6-1. Replacing the LEFT and RIGHT Sensors (M and L Board Specifications)

Bind the cables A and B with binding bands, taking care that they are not pulled or loosened
excessively during adjustment of sensor position.
,
Figure 5-6-1-1 Front Reference: Left Sensor, Rear Reference: Right Sensor
Maintenance Guide
A
5-8
The cable should have an
allowance when the movable
part is moved in the direction
indicated by an arrow mark.
B
Rev. 2.0