DANGER
[6]
CAL BLOCK
6-1. Replacing the CAL Block Board Assembly
1) Disconnect two bounded cables
2) Disconnect the φ4 air tube
3) Remove the four M3 SEMS bolts
remove it from the φ4 air tube. The CAL block board assembly can then be detached.
4) After the board has been replaced, reassemble the components in the reverse order.
When replacing the filter
Part No.: 40000641
Maintenance Guide
To prevent any trouble caused by accidental machine start, always
shut-down the power before starting the maintenance and
adjustment work.
from the board.
from the elbow union.
, pull the board downward from the CAL side cover, and
1
1
4
, it is not necessary to turn off the air.
Part name: Filter
2
6-1
Rev. 2.0
3