Rev. 2.0
Maintenance Guide
10) The progress status is shown using the progress bar during installation.
11) When the installation is completed, the "InstallShield Wizard Completed" screen will appear.
Click the [Finish] button to complete the installation.
12) Follow the steps stated in section 13-2-4-2, Updating the C-drive, to update the C-drive.
∗ CAUTION
If the system is started up again without updating of the C-drive, the installation information is
cleared from the C-drive due to C-drive protect function, causing the system not to be started up
correctly.
13-38