Auto Board Width Adjustment (Optional); Assembling The Awc Bracket - JUKI KE-3010 Maintenance Manual

DANGER

[15] AUTO BOARD WIDTH ADJUSTMENT (OPTIONAL)

15-1. Assembling the AWC Bracket

1) Assemble the AWC MOTOR ASM
2) Assemble so that the label B is faced upward.
3) Connect the grounding cable together with the part A.
4) Pass the AWC PULLEY A
∗ Arrange the end face of the part C.
∗ Carefully check the pulley set screw position.
Ｂ
Maintenance Guide
To prevent any trouble caused by accidental machine start, always
shut-down the power before starting the maintenance and
adjustment work.
to the AWC BRACKET E
through the motor shaft and secure it with the screws
② ③
Ａ
Figure 15-1-1
Part No.
E2163725000 AWC BRACKET E
40048077 AWC MOTOR ASM
SL6041292TN SCREW M4 L=12
E2153725000 AWC PULLEY A
SM8040602TP SCREW M4X0.7 L=6
15-1
with the screws
①
Part name Q'ty
1
1
4
1
2
Rev. 2.0
.
.
④
Ｃ