JUKI KE-3010 Maintenance Manual page 17

<XL board specifications>
1) Remove the SL6061292TN, SL3061232TN to detach the COVER_FBR_XL.
2) In the same manner as described for the machine with the M and L board specifications,
loosen the COUPLING_Y_screw (do not remove the screw at this time) and disconnect the
connector of the SERVO MOTOR 1500W cable.
3) Remove the SL6082502TN and replace the SERVO MOTOR 1500W.
4) Reassemble the components in the reverse order of disassembly.
∗ The clearance between the COUPLING and motor is 4 mm. The tightening torque of the
COUPLING_Y_screw is 7 N⋅m. (Figure 1-1-3-4)
COVER_FBR_XL
Figure 1-1-3-5 Removal of Cover of Machine with XL Board Specifications
Figure 1-1-3-6
Maintenance Guide
A
SL3061232TN
View of A
SERVO MOTOR 1500W
COUPLING_Y_screw
COUPLING_Y
1-6
B
SL6061292TN
Rev. 2.0
View of B
SM6082502TN (×4)
Figure 1-1-3-3