1-8-2. Removing the X Ball Screw
(1) Loosen the coupling on the X motor
ball screw side.
(2) Loosen the set screw, remove the set screw and set piece, and loosen the lock nut.
∗ After the set screw has been removed, pay special attention so that the set piece is not
lost.
The set piece and lock nut are used as a set.
[Lock nut (Part No.: 40093876)]
(3) Detach the X ball screw frame assembly.
(4) Remove the screws that secure the X ball screw frame assembly.
Remove SL6053092TN (2 pcs.).
Maintenance Guide
Set piece
Remove SL6044092TN (2 pcs.).
Remove SL6042592TN (2 pcs.).
Wrench 22
X ball screw frame assembly
1-60
Wrench 17
Rev. 2.0